|
Three types each with a compact design For the remote maintenance of a S7 controller you need a TeleService adaptor and a suitable modem. The industrial modem is perfectly suited for this due to its compact design and the easy installation on DIN top hat rails. Varied ranges of application
Remote maintenance of S7 controllers with STEP 7 via modem using an ACCON-MPI/TS-Adapter. You have the choice
The industrial modem is available in 3 versions which differ in the modem type. The following versions are available: analogue modem, ISDN adapter and dualband GSM modem.
For the Industrial Modem GSM you need a GSM antenna which has to be bought separately. Furthermore, a SIM card with data activation (CSD - Circuit Switched Data) is necessary. Normally, it includes a separate telephone number for incoming data connections. You will receive further information from your mobile network operator. Order data Accessories
ACCON-MPI/TS-Adapter
Pocketmodem 56k INT
Pocketmodem ISDN
Triband antenna GSM magnet base Technical data | | Industriemodem 56k | Industriemodem ISDN | Industriemodem GSM | | Telephone connection | Connection cable for TAE socket (3 m) | ISDN-Connection cable (3 m) | FME bushing for GSM antenna | | Supported GSM network frequency | - | - | 900 MHz, 1800 MHz | | Connection to the TeleService adaptor or the PC | RS232 with 9-pin SUB-D bushing, via supplied cable | RS232 with 9-pin SUB-D bushing, via supplied cable | RS232 with 9-pin SUB-D bushing, via supplied cable | | Dimensions (W x H x D) in mm | 23 x 110 x 75 | 55 x 110 x 75 | 23 x 110 x 75 | | Protection type | IP 20 | IP 20 | IP 20 | | Supply voltage | 12 – 24 VDC | 10 – 60 VDC | 12 – 24 VDC | | Power consumption | 1,6 W (type) / 5 W (max.) | 0,5 W | 2,5 W | | Operating temperature | 0 °C to 55 °C | 0 °C to 55 °C | 0 °C to 55 °C | | Allowed relative humidity | 5 % to 95 % (no bedewing) | 5 % to 95 % (no bedewing) | 5 % to 95 % (no bedewing) | | Authorization | R&TTE, CTR21 | CTR3 | R&TTE, CTR31, CTR32 |
|
Products 
