Digital Leakage Current Clamp
Digital leakage current clamp for troubleshooting
- For measurement of shield currents
- Smallest resolution 0.01 mA
- Integrated measured value memory (data hold)
Digital leakage current clamp for 40Hz-1.000Hz, Min/Max, with integrated data hold. The digital leakage current clamp is a recommended accessory for the PROFIBUS Tester BC-700.
Included in scope of delivery:
- 1 leakage current clamp
- 2 test leads with test probes
- 2 batteries 1,5V IEC LR6
- 1 ever-ready case
- 1 instruction manual
| Display | 3-3/4, LCD incl. functions and symbols | ||
| Analogue Bargraph | 40 segments | ||
| Range selection | Manual | ||
| Auto-Power-Off | Approx. 30 minutes | ||
| Overload display | Blinking left digit | ||
| Measuring rate | 20 measurements/s (bargraph) 2 measurements/s (digital display) |
||
| Clamp opening | Approx. 30 mm | ||
| Overvoltage Category | CAT II, 600 V | ||
| Battery display | At low battery *U | ||
| Power supply | Battery 1,5 V IEC LR6 (Alkaline) | ||
| Power consumption | Approx. 10 mA | ||
| Operation temperature | -10° C … 50° C (14° F … 122° F) | ||
| Storage temperature | -20° C … 60° C (-4° F … 140° F) | ||
| Humidity | < 75 % relative humidity | ||
| Dimension in mm (W x D x H) | 183 x 63.6 x 35.6 (7.2 x 2.5 x 1.4 inch) | ||
| Weight | Approx. 190 g (7 oz) | ||
| Current AC | |||
| Range | Resolution | Accuracy 50/60 Hz | Accuracy 40 Hz … 1 kHz |
| 0 – 40 mA | 10 μA | ±(1.5 % rdg. +3 D) | ±(2.0 % rdg. +5 D) |
| 0 – 400 mA | 100 μA | ±(1.5 % rdg. +3 D) | ±(2.0 % rdg. +5 D) |
| 0 – 4 A | 1 mA | ±(1.5 % rdg. +3 D) | ±(2.0 % rdg. +5 D) |
| 0 – 40 A | 10 mA | ±(1.5 % rdg. +3 D) | ±(2.0 % rdg. +5 D) |
| 0 – 50 A | 0.1 A | ±(1.5 % rdg. +5 D) | ±(2.0 % rdg. +5 D) |
| 50 – 60 A | 0.1 A | ±(3.0 % rdg. +5 D) | ±(3.5 % rdg. +5 D) |
| Voltage AC | |||
| Range | 0 – 400 V | ||
| Resolution | 0.1 V | ||
| Accuracy | 50/60 Hz: ±(1,0 % rdg. +3 D) 40 Hz … 1 kHz: ±(2,0 % v.M.± 4 D) |
||
| Resistance | |||
| Range | 400 Ω | ||
| Resolution | 0.1 Ω | ||
| Accuracy | ±(1 % rdg. +3 D) | ||
| Overload protection | 600 V AC | ||
| Continuity | |||
| Range | Ω/*T | ||
| Resolution | 0.1 Ω | ||
| Signal tone | < ca. 40 Ω | ||
| Open circuit voltage | < 0.4 V | ||
| Overload protection | 600 V | ||
Accessory Items
