Skip to main content Skip to search Skip to main navigation

Expansion module MRXcard-SI

Product information "Expansion module MRXcard-SI
The expansion module MRXcard SI adds an RS232/485 interface to your MRX, as well as more digital inputs and outputs.
Serial interface
RS232 (Serial1) 1 x RS232/D-Sub-9 (m)
RS485 (Serial2) Terminal connector (D+, D-, GND), termination and bias via DIP switch
Functions Serial-Ethernet gateway (incoming and outgoing connections, Modbus TCP/RTU gateway, modem emulation, editable AT answer list, phone number conversion to IP addresses)
USB 2.0 Prepared, USB 2.0 host, socket type A, output current max. 200 mA
Inputs/Outputs
Digital inputs 2 digital inputs, monitorable status, high active, as per EN 61131-2, type 1, push-in terminal connectors
Digital outputs 2 x via terminals, potential-free change-over relay (2A at max. 30 V DC/42 V AC), switchable via action
Indications (LEDs) Condition of digital inputs and outputs
Supply/environmental conditions
Voltage Supplied via MRX
Power consumption Typical approx. 1.0 W, max. 2.5 W
Operating temperature -30 ... +75 °C (maximum, possibly limited by MRX variant used)
Terminals Push-in terminal connectors (maintenance free), rigid/flexible conductors up to 2.5 mm 2
Inputs/outputs: 2 x 5-pin, RS485: 3-pin
Weight 75 g
Certifications CE, UKCA, FCC Part 15 Class B, IC
Data sheet MRX
Data_sheet_MRX.pdf 2.14 MB May 28, 2025
Manual MRX
Manual_MRX.pdf 2.92 MB May 28, 2025
Quick Installation Guide Router English
QIG_Router_en.pdf 1.46 MB December 12, 2023
DELTA LOGIC Connectivity Service First Steps
DLCS_First_Steps.pdf 122 KB January 08, 2024