Connecting IT and OT
with Adapters from DELTA LOGIC

The compact all-rounder among the programming adapters between PC and S7 PLCs ACCON NetLink PRO compact is a handy communication and programming adapter between PC and S7 controllers. The electronics of the ACCON NetLink PRO compact is placed in the case of a PROFIBUS connector. Thus, the adapter is very small and handy.As all-rounder, the ACCON NetLink PRO compact can be connected to the PLC via MPI, PROFIBUS and PPI. The ACCON NetLink PRO compact automatically detects the current bus settings of the PLC. Perfect fields of application As programming adapter to create and change the PLC program As communication adapter for visualisations As communication adapter to access the PLC's data For remote maintenance via internet, intranet, dial-in router Varied ranges of application Programming S7 controllers with STEP 7 Changing S7 programs via a company network (intranet) Projecting HMI devices with WinCC flexible Connecting visualisations to S7 PLCs via TCP/IP (RFC 1006) Logging S7 data via TCP/IP (e.g. with ACCON-EasyLog) Remote maintenance of S7 controllers via internet (VPN, e.g. via the DELTA LOGIC Connectivity Service) Convincing and varied The communication of the ACCON NetLink PRO compact to the PC is effected via TCP/IP so that it can be used for remote maintenance purposes via router, intranet and internet. The ACCON NetLink PRO compact can be configurated via its integrated website. For the security of your facility, the access to the website is protected by a password.The ACCON NetLink PRO compact supports the S7 communication via RFC 1006 (ISO on TCP). Thus, TCP/IP communication processors (e.g. CP343-1) can be replaced by this adapter. However, projected connections are not supported. Furthermore, the ACCON NetLink PRO compact supports the parameterization of DP-Slaves via DP-V1 (class 2).A driver for SIMATIC applications (ACCON-S7-NET) is included in delivery. The ACCON NetLink PRO compact is fed by the connected bus. Alternatively, you can use external 24 VDC (e.g. with this external power supply). Technical highlights Compact design Automatic bus profile detection Full PROFIBUS speed up to 12 Mbps Extended diagnostics Supporting MPI, PROFIBUS and PPI Supporting DHCP Supporting slave parameterization via DP-V1 (class 2) Supporting all standard SIMATIC Engineering Tools Supporting ISO on TCP (RFC 1006) Active connection cable, therefore no spur lines Voltage supply from the CPU External 24 VDC voltage feed possible Plug with PG bushing Galvanically isolated Applicable up to 60 ° ACCON-AGLink implemented Made in Germany

The pro for connections to S5 PLCs ACCON-S5-LAN is a connection adapter between a PC and an S5 PLC via TCP/IP. It is fed by the PLC's interface. An external power supply is not necessary. Perfect fields of application As programming adapter to create and change the PLC program As communication adapter for visualizations As communication adapter to access the PLC's data Varied ranges of application Programming an S5 PLC, e.g. with ACCON-PG or Siemens' STEP 5 software Visualising values of an S5 PLC with the DELTA LOGIC S7/S5-OPC Server via TCP/IP Convincing and varied In order to visualize and program simultaneously, the ACCON-S5-LAN has an integrated multiplexer.With the included software, a virtual serial interface can be installed on the PC. Each software supporting a serial connection to the S5 PLC can therefore use the ACCON-S5-LAN.Furthermore, the ACCON-S5-LAN supports the S5-TCP/IP (RFC 1006) protocol as well as the S7-TCP/IP (RFC 1006) protocol. Thus, the ACCON-S5-LAN can be used with all programs supporting these protocols without additional drivers. Technical highlights Compact connection of S5 PLCs to ethernet Quick and simple configuration and bringing into service Integrated multiplexer for simultaneous programming and visualization Access via virtual COM port Access via S5-TCP/IP (RFC 1006) Access via S7-TCP/IP (RFC 1006)