Schwabenware
Innovative Software and Hardware for Automation

For access to your Siemens controller via OPC UA the ACCON OPC UA Server is the right choice. Besides S7 PLCs, it is also suitable for SINUMERIK machine tool controllers. One of the few servers certified by the OPC Foundation that also supports optimized data blocks.

The compact all-rounder among the programming adapters between PC and S7 PLCs ACCON NetLink PRO compact is a handy communication and programming adapter between PC and S7 controllers. The electronics of the ACCON NetLink PRO compact is placed in the case of a PROFIBUS connector. Thus, the adapter is very small and handy.As all-rounder, the ACCON NetLink PRO compact can be connected to the PLC via MPI, PROFIBUS and PPI. The ACCON NetLink PRO compact automatically detects the current bus settings of the PLC. Perfect fields of application As programming adapter to create and change the PLC program As communication adapter for visualisations As communication adapter to access the PLC's data For remote maintenance via internet, intranet, dial-in router Varied ranges of application Programming S7 controllers with STEP 7 Changing S7 programs via a company network (intranet) Projecting HMI devices with WinCC flexible Connecting visualisations to S7 PLCs via TCP/IP (RFC 1006) Logging S7 data via TCP/IP (e.g. with ACCON-EasyLog) Remote maintenance of S7 controllers via internet (VPN, e.g. via the DELTA LOGIC Connectivity Service) Convincing and varied The communication of the ACCON NetLink PRO compact to the PC is effected via TCP/IP so that it can be used for remote maintenance purposes via router, intranet and internet. The ACCON NetLink PRO compact can be configurated via its integrated website. For the security of your facility, the access to the website is protected by a password.The ACCON NetLink PRO compact supports the S7 communication via RFC 1006 (ISO on TCP). Thus, TCP/IP communication processors (e.g. CP343-1) can be replaced by this adapter. However, projected connections are not supported. Furthermore, the ACCON NetLink PRO compact supports the parameterization of DP-Slaves via DP-V1 (class 2).A driver for SIMATIC applications (ACCON-S7-NET) is included in delivery. The ACCON NetLink PRO compact is fed by the connected bus. Alternatively, you can use external 24 VDC (e.g. with this external power supply). Technical highlights Compact design Automatic bus profile detection Full PROFIBUS speed up to 12 Mbps Extended diagnostics Supporting MPI, PROFIBUS and PPI Supporting DHCP Supporting slave parameterization via DP-V1 (class 2) Supporting all standard SIMATIC Engineering Tools Supporting ISO on TCP (RFC 1006) Active connection cable, therefore no spur lines Voltage supply from the CPU External 24 VDC voltage feed possible Plug with PG bushing Galvanically isolated Applicable up to 60 ° ACCON-AGLink implemented Made in Germany

ACCON AGLink enables the data exchange between PC and Siemens controller. Among other things, it offers functions for data access, diagnostics and time synchronization. Compatible with various operating systems, programming languages and controllers, such as S7, S5, SINUMERIK, LOGO! and Siemens-compatible PLCs.

Monitor and store your PLC process data for quality control as CSV file or in an SQL database with the modular datalogger ACCON EasyLog. It supports S7 Classic and TIA Portal project formats. The graphical representation of your data is also possible via the corresponding module.

The pro for connections to S5 PLCs ACCON-S5-LAN is a connection adapter between a PC and an S5 PLC via TCP/IP. It is fed by the PLC's interface. An external power supply is not necessary. Perfect fields of application As programming adapter to create and change the PLC program As communication adapter for visualizations As communication adapter to access the PLC's data Varied ranges of application Programming an S5 PLC, e.g. with ACCON-PG or Siemens' STEP 5 software Visualising values of an S5 PLC with the DELTA LOGIC S7/S5-OPC Server via TCP/IP Convincing and varied In order to visualize and program simultaneously, the ACCON-S5-LAN has an integrated multiplexer.With the included software, a virtual serial interface can be installed on the PC. Each software supporting a serial connection to the S5 PLC can therefore use the ACCON-S5-LAN.Furthermore, the ACCON-S5-LAN supports the S5-TCP/IP (RFC 1006) protocol as well as the S7-TCP/IP (RFC 1006) protocol. Thus, the ACCON-S5-LAN can be used with all programs supporting these protocols without additional drivers. Technical highlights Compact connection of S5 PLCs to ethernet Quick and simple configuration and bringing into service Integrated multiplexer for simultaneous programming and visualization Access via virtual COM port Access via S5-TCP/IP (RFC 1006) Access via S7-TCP/IP (RFC 1006)

Fully modular industrial router for optimal coupling of your networks. The MRX series enables you to make targeted use of the latest technology, ideal for your specific application. Thanks to the fully modular design, you can flexibly equip your MRX for your requirements and adapt it to new challenges at any time. In addition to the perfectly optimized computing power, you thus also benefit from the best possible price/performance ratio and an above-average service life.  Wide range of applications Based on its modular concept, you can equip your MRX with exactly the functions you need for your infrastructure. Two housing widths, various basic versions and a range of additional modules, so-called MRXcards, are available for this purpose. Thanks to these diverse options, you are highly flexible both in terms of acquisition and in terms of any adaptations that may be required at a later date.The integrated firewall and VPN functionality also allow secure remote maintenance of your end devices. The two housing widths Two housing widths are available for the MRX series MRX3: Here you have 3 slots at your disposal, two of which are defined by the selected base variant. In the third slot you can insert any other module (MRXcard) MRX5: Here you have 5 slots at your disposal, two of which are defined by the respective selected basic variant. Any other modules (MRXcard) can be inserted into the other three slots. The four basic variants The MRX series is available in four basic variants, each with different basic equipment. The basic variant MRX LAN consists of an Ethernet module with five LAN ports, as well as a power module for power supply and with 2 digital inputs. The five LAN ports can be divided into up to five IP networks. The basic variant MRX LTE consists of an Ethernet module with five LAN ports, as well as a LTE module with integrated power supply and 2 digital inputs. The five LAN ports can be divided into up to five IP networks. The world variant supports a greater variety of cellular frequencies.The basic variant MRX Fiber consists of an Ethernet module with five LAN ports, as well as a SFP/Fiber module with integrated power supply and 2 digital inputs. The five LAN ports can be divided into up to five IP networks. The basic variant MRX DSL consists of an Ethernet module with five LAN ports, as well as a DSL module with integrated power supply and 2 digital inputs. The five LAN ports can be divided into up to five IP networks. MRX-DSL is available for DSL-Annex A and for DSL-Annex B. Note: ADSL connections in Germany are usually operated in the Annex B variant. You can obtain precise information on the Vairante used (Annex A or Annex B) from your provider of the connection. This applies especially to connections outside Germany. Various expansion options If the possibilities of the respective basic modules are not sufficient for you, you can extend your MRX at any time by different further modules, so-called MRXcards. More detailed information about the available modules can be found in the category Apps & Acessories. Convincing and versatile To ensure that a secure VPN connection can be used effectively, we offer you a convenient VPN portal. With the DELTA LOGIC Connectivity Service, you can create VPNs of any complexity and access the end devices via direct routing.You don't want to set up your router for our DELTA LOGIC Connectivity Service yourself? No problem. We will be happy to pre-configure your new router for you. Simply send us the completed router configuration form with your order. Technical highlights Segmentation into several local IP networks Multiple VPN tunnels can be used in parallel Firewall in the tunnel (e.g. demarcation of remote accesses) Flexible administration with profile manager Access management via user roles Advanced event-based control (e.g. profiles, connections, redundancy) High performance for broadband networks and high VPN data rate Made in Germany

The effective and universally applicable diagnostics tool The PROFIBUS-Tester BC-700 with oscilloscope view in stand-alone mode is a measuring device which allows a full and reactionless testing of PROFIBUS segments during operation. Thus, even sporadic interferences are detected. Furthermore, the integrated master simulator allows testing the bus without the need for an operational readiness of the PLC. Thus, even single »suspicious« bus devices can be tested. Perfect fields of application Installation, bringing into service, documentation, acceptance and optimization of PROFIBUS networks For preventive maintenance Debugging and testing field devices Varied ranges of application On connection to a PROFIBUS-DP segment, the baudrate respectively the idle voltage is automatically detected.The PROFIBUS-Tester BC-700 can either be operated via PC/Notebook or alternatively self-sufficiently via a four-line display and the four function keys.The display and detail analysis of the measuring results is effected on the PC with the free operating software PB DIAG Suite.With the PROFIBUS-Tester BC-700, bringing into service times can be reduced. Later in service, the plant availability can be ensured and therefore be increased due to regular preventive testings. And if there are interferences anyway, the PROFIBUS-Tester BC-700 will locate the problem fast and securely. In this way, an unscheduled idleness can at least be reduced. Convincing and varied The PROFIBUS-Tester BC-700 provides extra-reliable measuring results by what field bus problems can simply and securely be detected and solved. It is the first measuring device which differs accurately if there are physical problems, e.g. with cables or connectors, or if there is a communication problem with the PLC or a bus device. Technical highlights Integrated rechargeable battery for operation without external power supply Comprehensive network tests in stand-alone mode even without a laptop With cable test function Supporting simultaneous protocol analysis and diagnostics of the signal quality of all bus devices Device-relevant measuring of the signal characteristics with integrated storage oscilloscope Detection of the electric signal quality of the single bus devices Telegram decryption for FDL, DP-V0, DP-V1, DP-V2 Comprehensive online analysis of all essential parameters of a PROFIBUS network Free, intuitively operable software PB DIAG Suite (Easy-To-Use) Comfortable creation of testing and acceptance protocols Self-sufficient recording without PC is possible Functionality of the test tools  Test  functions PROFIBUS Tester BC-700-PB  Test features  Battery powered  X  Graphical color display  X  Galvanic isolation X  Suitable for PROFIBUS PA Adapter (MPB)  X  Master simulator X  Trigger Input/Output X  Stand-alone mode without PC  Test with results  Bus status X  Signal analysis X  Station localization (Topology)  X  Oscilloscope  X  Cable test  X  Recording  Quick test   X  Trend   X  Operation with PC and PROFIBUS Diagnostics Suite  Network status  Quick and User-controlled test X  Overview bus physics and communication X  Protocol analysis X  Signal analysis (EIA-485) X  Signal analysis (MPB)   optional  Topology X  Trend  Signal quality X  Critical events X  Expert mode  Frame recording X  Oscilloscope X  Test report X Delivery scope The BC-700 carrying case contains: Measurement device with RS485 interface Rechargeable battery pack (internal battery) Wide-range power supply with European and US mains power cables RS485 D-sub adapter cable BC-600-PB-CB-DSUB-2 “Standard” (cable petrol blue, light connector) for PROFIBUS DP USB cable, 2 m Terminal block for trigger input/output CD-ROM with driver software, PC software and detailed integrated help system in English and German Documentation for BC-700 and for the PROFIBUS Diagnostics Suite PC software Recommendation As an aditional accessory the digital leakage current clamp is recommended.

The icom Data Suite turns your router based on the IoT operating system icom OS into a powerful IoT gateway. You'll get a comprehensive, flexible and scalable software package for connecting and processing data points. Extend the functionality for reliable and secure data transmission by data acquisition, monitoring and control options for your application. Process your data directly on the Smart Device. Transmit them via SMS, e-mail, MQTT or HTTP to customer-individual infrastructures, SCADA and ERP systems or directly to cloud services. Visualise current values directly on the Smart Device or use processing options like logging, reporting and many more in the cloud. Control your application directly via SMS, from cloud platforms or from SCADA systems. Besides our direct cloud connectors (Cumulocity/Telekom Cloud of Things), the protocols MQTT, IEC 60870-5-104/-101* and OPC UA* are also available. icom Data Suie - Package 2 Flexible contains all modules from icom Data Suite - Package 1 Essential. Additionally included are the modules Siemens S7, IEC 60870-5-101 Master, CODESYS, OPC UA Client and data logger. OPC UA client | OPC UA server connection: Cyclical call-off or subscription possible. Secure connection and authentication. IEC 60870-5-101 master: Serial connection of RTUs to the station control system via RS485/RS232. CODESYS: Connection of CODESYS-based devices with Version V2 or V3. Siemens S7: Siemens S7 control systems (S5 on request) are connected via Ethernet (TCP) or serially (RTU).Data logger: Record and save data points. Export as a compressed CSV file, triggered by event or time. Window function. The icom Data Suite can be tested for 45 days free of charge. More information about how to activate it can be found in First Steps document in the Downloads tab.

VPN service for secure access to your systems and applications DELTA LOGIC Connectivity Service gives you the ability to set up and manage your own VPN. Just a few clicks and you can integrate the equipment relevant to you, e.g. PCs, routers and locally connected network devices (e.g. PLCs or HMIs). As a result, you can customize the VPN to your needs with minimal effort and maximize the efficiency of your remote maintenance. Perfect fields of application The DELTA LOGIC Connectivity Service is ideally suited to setting up and administering VPNs of almost any size and complexity - with the highest possible security. Every client must pass certificate-based authentication (X.509) before being allowed to establish the encrypted connection to the portal. These certificates can be automatically renewed at regular intervals. Even within the VPN, you can increase security through access controls. Assigning subscriber units to different groups clearly defines which device can communicate with which remote station. The integrated firewall means it’s also possible to restrict this data traffic even more specifically (based on IP addresses, ports and protocols). In addition, this VPN portal offers the possibility of internal monitoring. Here, the connection to the VPN clients or end devices is checked at regular intervals. In the event of a break in the connection, you can be notified directly via e-mail. Varied ranges of application To learn about the capabilities and deployment range of the DELTA LOGIC Connectivity Service, we invite you to test it for free. To this end, we’ll provide you with four licenses without obligation for a period of four weeks. Simply register directly at the DELTA LOGIC Connectivity Service‘s website: https://connectivity.deltalogic.de Convincing and multifaceted In addition to the DELTA LOGIC Connectivity Service, at DELTA LOGIC you’ll find a wide range of diverse VPN routers. These VPN routers can be integrated via an intuitive quick start wizard with a few clicks on the DELTA LOGIC Connectivity Service. For more information on the VPN router models, see the Accessories tab below or go directly to the remote maintenance product category. If you purchase a new router, you can also have us pre-configure it directly for use with the DELTA LOGIC Connectivity Service. Technical Highlights Quick start for DELTA LOGIC VPN routersHigh security through various ISO 27001 certified data centers and multi-factor authentication Full routing with direct addressing down to the individual end device Free assignment of IP addresses within the VPN Access controls from within the VPN Network monitoring for VPN clients and end devices Access also available without license via web proxy Certificate-based authentication (X.509) Automatic certificate recognition2 free licenses for an always on connection between PC and routerr